Micro Synthetic Fibre Concrete Reinforcement Fiber Virgin Homopolymer PP Fiber Multifilament

Product Description

                 Micro Synthetic Fibre Virgin Homopolymer PP Fiber Multifilament For Concrete

Multifilament Polypropylene Fiber also called Monofilament PP Fiber,

it is easy to finish, fully oriented,100% Virgin Homo-polymer Polypropylene Multi-filament Fibrous Reinforcement.

Our PP Fiber Multifilament was produced by referring foreign advanced technology for fibers pinning, modified by adding functional additive
and special surface-treating.

Mixing into cement concrete, it has many advantages such as good dispersing, better water affinity, strong linking force.

Our Monofilament Polypropylene Fiber offers long term durability, and functions as a plastic shrinkage reinforcement intended

to reduce the formation of shrinkage cracks prior to the initial set.

This Monofilament Fiber is non-corrosive, chemically inert, and 100% Alkali Proof.

2, Applications:

A). suit for the waterproof layer, floor, inner & outer wall of industrial and civil construction.

B). Increase cracking resistance on the surface of industrial workshop, warehouse and parking lot.

C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool, pond and ditch.

D). Suit for any mortar projects and common concrete projects.

E). Highway, bridge and other roads.

3, Applying Instruction:

A). Dosage: for resist the common cracks on surfaces, 0.9kg/m3 fibers to cement mortar Is enough,

                    and for increasing reinforce and seepage resist application 1.8kg/m3 is enough.

B). Stirring requirement: The proportion of cement, sand and aggregate is no need to be changed.

      Put cement, aggregate, additive and fiber together, then stir after adding enough water and time for stirring can be prolonged for

      2~3 minutes in order to make the compound mix completely.

      Also it can be mixed with cement and other aggregates in advance,

      stirring by adding water at worksite  before construction.

4, Brief specification:

Compliance

ASTM C1116, Type III

BS EN 14889 - 2

1), Normal Type MicroFiber Monofilament PPMF-A

2),Special Type MicroFiber Monofilament

    A, MicroFiber Monofilament PPMF-B: High Tensile Strength -----------600MPa Min

    B, MicroFiber Monofilament PPMF-C: Superfine---------------------------20+/-2um Dia

    C, MicroFiber Monofilament PPMF-D: High dispersion------------------Special Surface-Treating

5, Packing: